The logic of the load
The Romanesque nave was built to carry weight by refusing to let it go anywhere unexpected. Its walls are thick because the vault above — a continuous barrel of stone — pushes outward along its entire length, and the only reliable answer is mass. Cut a large opening in a wall like this and you remove the very material that resists the spread; the openings here are small for precisely that reason, set high and deeply splayed so that the light they admit costs as little structural thickness as possible.
The arcade that divides nave from aisle follows the same discipline. The piers are square or near-square in section, squat in proportion, and placed at intervals dictated by what the barrel can comfortably span. Each arch is round-headed and rises without a clerestory above it — the aisle roofs abut the nave wall below the vault's haunch, leaving no room for a second tier of windows. The result is a vessel that is genuinely dark, lit from the ends and from those high, narrow slits in the outer walls.
Evidence for the building campaign survives in the masonry itself. The coursing is consistent across long runs of wall, with bed heights that suggest a single quarrying and dressing programme rather than several. Mortar colour and aggregate remain uniform through the main structure, distinguishing the original build from later repairs where fills and patches show a different binder. The tooling on exposed surfaces — flat axe-work with occasional diagonal strokes — belongs to the technique in use before the finer claw chisel became the standard dressing tool, and that sequence can be checked against the tooling marks left by each distinct campaign elsewhere in the building.

What the Romanesque nave does not have is a crossing tower that was planned from the outset in its current form: the evidence of straight joints and changes in quoin character at the junction points suggests the tower as it stands is a later intervention tied into, rather than bonded through, the earlier walling.
- Romanesque naveThe primary build: consistent coursing, uniform mortar, flat axe tooling.
- Crossing towerA later intervention — straight joints and quoin character set it apart from the nave walls.
- Gothic naveAdded alongside rather than replacing the Romanesque structure.
The nave's survival alongside rather than under the Gothic construction that followed it is the condition that makes the whole building legible. When the Gothic campaign began, the decision to build a new nave adjacent — rather than to demolish and rebuild — preserved these walls intact. That decision and what it preserved is the clearest demonstration of what an undemolished building actually is: not a ruin, not a restoration, but a sequence you can still read in elevation.

